QUAZAR QPR Memory for FPGAs

A single Quazar QPR memory IC replaces 4 to 8 QDR devices and expands the onboard FPGA memory with high speed, high-capacity SRAM. Board complexity, design, debug, and costs are all reduced by using only 4 to 16 serial SERDES connections.

FEATURES:
  • High Capacity, low latency - 576Mb or 1Gb• Single device replaces 4 to 8 QDRs
  • Better performance/lower cost than QDR
  • Bandwidth up to 640 Gbps, Low tRC
  • Supports Dual Port Memory
TYPICAL APPLICATIONS:
  • Replace QDR, RLDRAM or free up HBM
  • Oversubscription Buffers
  • Table Lookup
  • bE LineCards and Switches

BLAZAR BANDWIDTH ACCELERATOR ENGINES for FPGAs

A single Blazar Bandwidth Accelerator Engine IC provides In-Memory Compute that accelerates functions and adds high capacity, low latency memory for high bandwidth, low latency applications.

FEATURES:
  • In-memory compute
  • 640 Gbps, 5 Billion reads per second
  • Optional 32 RISC cores for higher compute
  • Supports Dual Port Memory
  • 576Mb or 1Gb memory included
TYPICAL APPLICATIONS:
  • SmartNIC & SmartSwitch
  • Metering and Statistics – trTCAM
  • 5G UPF and BNG offload
  • Serial Link Aggregation

STELLAR Packet Classification IP for FPGAs

Stellar Packet Classification Platform IP supports ultra-high search performance using lookup rules based on highly complex Access Control List (ACL) and Longest Prefix Match (LPM).

FEATURES:
  • 100s of millions of lookups per second
  • 25Gbps to 1Tbps+
  • Millions of complex rules
  • Up to 480b keys
  • Live Updates
TYPICAL APPLICATIONS:
  • 5G UPF and BNG
  • IPV4/6 address lookup and routing
  • Network Firewall & Anti-DDos
  • High–Reliability Systems

LineSpeed

The LineSpeed FLEX family is a set of 100G PHY products supporting a variety of retimer, gearbox, multiplexing, and redundant link functions. These are typically used on line cards or inside modules and support multiple data rates and 10G, 25G, and 100G industry standards.

FEATURES:
  • On-chip 100G RS-FEC for Gearbox and Retimer
  • Multi-Link Gearbox (MLG) for dense 10GbE aggregation
  • Retimer is protocol independent with mixed port speeds
  • Serial Mux/Demux to increase system throughput
  • Common register structure and package footprints 
TYPICAL APPLICATIONS:
  • 100GbE LineCards and Switches
  • 10GbE Port Aggregation
  • Serial Link Aggregation
  • High-Reliability Systems

A single Quazar QPR memory IC replaces 4 to 8 QDR devices and expands the onboard FPGA memory with high speed, high-capacity SRAM. Board complexity, design, debug, and costs are all reduced by using only 4 to 16 serial SERDES connections.

A single Blazar Bandwidth Accelerator Engine IC provides In-Memory Compute that accelerates functions and adds high capacity, low latency memory for high bandwidth, low latency applications.

Stellar Packet Classification Platform IP supports ultra-high search performance using lookup rules based on highly complex Access Control List (ACL) and Longest Prefix Match (LPM).

The LineSpeed FLEX family is a set of 100G PHY products supporting a variety of retimer, gearbox, multiplexing, and redundant link functions. These are typically used on line cards or inside modules and support multiple data rates and 10G, 25G, and 100G industry standards.
FEATURES:
  • High Capacity, low latency - 576Mb or 1Gb• Single device replaces 4 to 8 QDRs
  • Better performance/lower cost than QDR
  • Bandwidth up to 640 Gbps, Low tRC
  • Supports Dual Port Memory
TYPICAL APPLICATIONS:
  • Replace QDR, RLDRAM or free up HBM
  • Oversubscription Buffers
  • Table Lookup
  • bE LineCards and Switches
FEATURES:
  • In-memory compute
  • 640 Gbps, 5 Billion reads per second
  • Optional 32 RISC cores for higher compute
  • Supports Dual Port Memory
  • 576Mb or 1Gb memory included
TYPICAL APPLICATIONS:
  • SmartNIC & SmartSwitch
  • Metering and Statistics – trTCAM
  • 5G UPF and BNG offload
  • Serial Link Aggregation
FEATURES:
  • 100s of millions of lookups per second
  • 25Gbps to 1Tbps+
  • Millions of complex rules
  • Up to 480b keys
  • Live Updates
TYPICAL APPLICATIONS:
  • 5G UPF and BNG
  • IPV4/6 address lookup and routing
  • Network Firewall & Anti-DDos
  • High–Reliability Systems
FEATURES:
  • On-chip 100G RS-FEC for Gearbox and Retimer
  • Multi-Link Gearbox (MLG) for dense 10GbE aggregation
  • Retimer is protocol independent with mixed port speeds
  • Serial Mux/Demux to increase system throughput
  • Common register structure and package footprints 
TYPICAL APPLICATIONS:
  • 100GbE LineCards and Switches
  • 10GbE Port Aggregation
  • Serial Link Aggregation
  • High-Reliability Systems

Press Releases

Use Cases

Blog

Are You Ready For HyperSpeed

MoSys’ products focus on Accelerating applications to what we call HyperSpeed. This requires identifying every area in a system that affects speed and finding solutions to increase performance. Some applications may use all of our products in a single system. In those cases, we facilitate increasing performance to get closer to achieving HyperSpeed!

Quazar Family

Blazar Family

Stellar Family

LineSpeed Family

Lets stay connected.

MoSys’ innovative Memory ICs improve system speed and performance while eliminating data throughput and access bottlenecks on line cards and systems with aggregate rates above 100Gbps.

© 2022 MoSys, Inc.